Our Services

We Provide

CRACK FILLER Interior & Exterior

TECHNICAL DETAILS :

  • Can be used for cracks on all interior and exterior adsorbent surfaces,cracks and gaps caused by drying and shrinkage.
  • Apply Crack Seal at least 3 cm on either side of the crack for better adhesion.
  • Apply an additional coat of Crack Seal in case of severe dampness.
  • For best results, follow the recommended application procedure.

DISTEMPER Interior

TECHNICAL DETAILS :

  • Application Finish – Smooth & Uniform.
    Low Washability.
  • Surface dry – 45 to 60 min
  • Hard dry – 4 to 5 hrs
  • For best results, follow the recommended application procedure.
  • Gloss 60 – 80
  • Apply by Brush

DILUTION:

  • Add 300 – 400 ml potable water to
    one liter of paint. Mix well and the
    paint is ready to use.

DAMP PROOF Exterior

TECHNICAL DETAILS :

  • Application Finish – Smooth & Uniform.
  • Washability & Cleanablity – undercoat is expose after 2000 oscillation.
  • Surface dry – 90 min
  • Hard dry – 6 hrs
  • Gloss 60’ – 3
  • Resistance to Alkali

DILUTION:

  • Brush/Roller application
    15% – 20% dilution.
  • Spray 15% – 20% dilution.
  • Application viscosity
    (On Ford Cup No.4@ 30°C)
    Brushing/Spraying : 30 – 35 Secs.

ACRYLIC EMULSION Exterior

TECHNICAL DETAILS :

  • Appearance – Liquid
  • Colour – White
  • Water Resistance – 8
  • Specific Gravity – 1.20
  • Alkali Resistance – 7
  • Solids % – 55-65
  • Tensile Strength – 2,58
  • Elongation – 210
  • Adhesion to Dry Concrete -5.3

DILUTION:

  • Brush/Roller application
    10% – 20% dilution.
  • Spray 15% – 20% dilution.
  • Application viscosity
    (On Ford Cup No.4@ 30°C)
  • Brushing/Spraying : 30 – 40 Secs.

ACRYLIC EMULSION Interior

TECHNICAL DETAILS :

  • Application Finish – Smooth & Uniform.
  • Washability & Cleanablity – undercoat is expose after 4000 oscillation.
  • Surface dry – 90 min
  • Hard dry – 6 hrs
  • Gloss 60 – 80
  • VOC gm/L – 17.4
  • Resistance to Alkali

DILUTION:

  • Brush/Roller application
    15% – 20% dilution.
  • Spray 15% – 20% dilution.
  • Application viscosity
    (On Ford Cup No.4@ 30°C)
    Brushing/Spraying : 30 – 35 Secs.

ACRYLIC PRIMER Interior & Exterior

TECHNICAL DETAILS :

  • Application Finish – Smooth & Uniform.
  • Washability & Cleanablity – undercoat is expose after 4000 oscillation.
  • Surface dry – 90 min
  • Hard dry – 6 hrs
  • Gloss 60 – 80
  • VOC gm/L – 14.7
  • Salt spray test for 500 hrs – No sign
    of corrosion is observed after
    500 hrs exposure

DILUTION:

  • Brush/Roller application
    10% – 20% dilution.
  • Spray 15% – 20% dilution.
  • Application viscosity
    (On Ford Cup No.4@ 30°C)
  • Brushing/Spraying : 30 – 35 Secs.